To troubleshoot your Blendjet 2, ensure that the magnet on the jar and base are aligned, recharge or shake your Blendjet to resolve red flashing lights, and turn the blender upside down then flip it back over if blades are blocked. Blendjet 2 is a portable blender that allows you to make smoothies and blends anywhere, anytime.
However, like any other device, it may encounter some issues that can be frustrating and time-consuming to deal with. We will discuss some of the most common Blendjet 2 issues and provide some useful tips on how to troubleshoot them.
So, if you’re having trouble with your Blendjet 2 and don’t know what to do, keep reading to find solutions to some of the most common Blendjet 2 problems.
Charging Issues
Contents
Are you experiencing charging issues with your Blendjet 2 and not sure how to fix it? Fret not, we’ve got you covered. Below are some of the common charging issues that Blendjet 2 users face, along with their troubleshooting steps.
Not Fully Charged
Is your Blendjet showing signs that it’s not fully charged? Here’s what you can do. First, ensure that the charging cable is properly plugged in and connected securely to the device. Then, wait for at least 2 hours to make sure that it’s charged fully before using it. If your Blendjet still indicates that it’s not fully charged, repeat the charging process, making sure that the device is placed on a flat surface, away from any heat sources.
Red and Purple Light Issue
If you notice that your Blendjet is flashing red and purple lights, it could mean that the battery is low and needs charging. To resolve this issue, plug in the charging cable and wait for at least 2 hours. Your Blendjet should start flashing blue to indicate that it’s fully charged. In some cases, the blades may be blocked, which also causes the red and purple flashing lights. To fix this, try shaking the device or turning it upside down, then right side up again to loosen any obstructions.
BlendJet Charged but not Working
If your Blendjet is charged, but not working, it could be due to alignment issues. The device is designed with a small magnet on the base and jar that must be aligned, or the blades won’t spin. Make sure that the arrows on the base and jar line up before using it. If it still doesn’t work, you may need to clean the blades and jar of any debris or blockages. In some cases, the device might be overloaded, causing it to shut down. Ensure that you’re not filling the jar above the maximum fill line, and try blending in smaller batches.
In conclusion, identifying and resolving blendjet 2 charging issues is critical to ensure smooth operation and maximum performance of the device. Follow the steps above to troubleshoot the common charging issues and continue to enjoy the convenience of making smoothies on the go.
Alignment Issues
If you are experiencing alignment issues with your Blendjet 2, make sure that the small magnet on the jar and base is aligned. If the blades don’t spin and there are red flashing lights, recharge the Blendjet or try shaking it.
Additionally, flipping the Blendjet upside down and turning it back on may also help.
Not Enough Power
If your Blendjet 2 is not working, the first thing to check is the battery life. Red flashing lights indicate that the battery is low and needs to be recharged. If your Blendjet 2 has been charged, but it still isn’t working, it may be a problem with the blades. Ensure that the blades are not blocked, and the jar is not overloaded, which can make the motor work harder.
Alignment
If your Blendjet 2 is fully charged, and the blades are not blocked, the alignment may be the problem. A small magnet on the base and jar must align, or else the blades won’t spin. If you notice that your Blendjet 2 is not aligned, try shaking it or turning it upside down before flipping it back over. If this doesn’t work, you may need to manually align the arrows.
Aligning The Arrows
Aligning the arrows on the Blendjet 2 is easy to do, and will ensure that you get the best performance from your Blendjet 2. First, ensure that the jar is locked securely in place on the base. Next, look for the small arrows on the base and jar. These arrows need to be aligned to allow the Blendjet 2 to work correctly.
Here are the steps to align the arrows
- Turn off your Blendjet 2
- Take the jar off the base and inspect it closely for any signs of damage or obstruction
- Look for the small arrows on the base and jar
- Rotate the jar until the arrows align correctly with the base
- Place the jar back onto the base and make sure it locks correctly in place
- Turn on your Blendjet 2 to check if it is working properly.
If none of these troubleshooting tips resolve the problem, contact Blendjet customer service for further assistance. Remember that your Blendjet 2 comes with a money-back guarantee, so don’t hesitate to take advantage of it if you can’t get your Blendjet 2 working correctly.
Blade Issues
If you’re experiencing blade issues with your Blendjet 2, there could be a few reasons why. The blades may be blocked by an object, there may be too much in the jar, or the arrows may not be aligned. Always ensure the jar and base magnet are correctly aligned before use to avoid blade-related problems.
Blendjet 2 is a fantastic compact blender perfect for your on-the-go blending needs. It’s very useful when you want to blend something quickly and efficiently without the hassle of a large blender. However, like any other blender, the Blendjet 2 can face some issues. One of the main issues that users face is blade-related problems. In this segment, we’ll cover some of the blade issues that you may encounter while using the blender and how to troubleshoot them.
Object Stuck In The Blade
One common issue occurs when objects get stuck in the blade. The blades can get stuck when you put hard or large chunks of fruit or food items into the Blendjet 2. When this happens, the blender will struggle to blend them, and the blades may become lodged in the process.
To fix this issue, unplug your Blendjet 2, then remove the lid and blade assembly carefully. Use a spoon or fork to remove any stuck fruits or objects and clean the blades and jar thoroughly. Ensure that there are no food particles left on the blades or container. Once you’ve removed everything, reassemble the blender, and you’re good to go.
Blades Are Blocked
Another common issue users experience is the jamming of blades due to particles blocking them. This can occur when you’re blending dry or thick ingredients like nuts, coffee beans, or ice. It is better to add small amounts of these ingredients gradually, ensuring they get blended correctly.
To fix this issue, you can follow these steps:
- Unplug the Blendjet 2 and remove the lid and blade assembly
- Empty out any remaining contents that are stuck in the blender
- Rinse the blade assembly under warm water while carefully brushing off any stubborn particles using a soft-bristled brush.
- Reassemble the blade assembly into the container, ensuring all components are tightly assembled.
By following these steps, you can ensure that your Blendjet 2 functions correctly.
In conclusion, the Blendjet 2 is an excellent addition to your kitchen, enabling you to make quick blends on the go. While using the blender, if you experience any blade-related issues, then you can confidently troubleshoot these issues. By referring to the above-discussed methods, you can effectively resolve these problems without any hassle. The Blendjet 2 is truly an all-in-one blender that is easy to use and provides efficient blending.
Jar Issues
If you’re having trouble with your Blendjet 2, there are a few things you can do to troubleshoot the problem. One of the most common issues with Blendjet 2 is related to the jar. In this section, we will discuss two common jar-related issues: Too Much in the Jar and Filling the Jar.
Too Much In The Jar
It is essential to ensure that you don’t overload the Blendjet 2 with ingredients. Putting too much in the jar can cause the blending process to slow down, or the blades might not be able to mix the contents evenly.
If you notice the blending process slowing down or getting stuck, your Blendjet 2 may be overloaded. In this situation, it is better to remove some of the ingredients and try blending them in two batches. To avoid this issue, make sure you are using the recommended amount of ingredients mentioned in the Blendjet 2 manual.
Filling The Jar
Another common jar-related issue is regarding filling the jar. To make sure that your Blendjet 2 works correctly, you need to fill the jar with the right amount of ingredients. Overfilling the jar can block the blades, making it difficult to blend your ingredients evenly.
To avoid this issue, fill the jar with solid ingredients first, then pour in the liquids. Ensure you don’t fill beyond the MAX line. Otherwise, you might see leakage issues or jar breakage. With this in mind, we recommend following the filling guidelines mentioned in the Blendjet 2 manual.
Blendjet 2 Troubleshooting Resources
BlendJet 2 troubleshooting can be frustrating when it doesn’t work as expected. You may be blending your favorite smoothie, and suddenly, the BlendJet stops spinning, or it doesn’t turn on at all. Don’t worry; we’ve compiled a list of BlendJet troubleshooting resources that can help.
Blendjet Help Center
If your BlendJet is not working correctly, it’s best to start by checking the BlendJet Help Center. This section is available on their website and has a range of answers to common BlendJet problems. The BlendJet Help Center is a comprehensive knowledge source that includes frequently asked questions, getting started guides, and a support page where you can submit your specific issue.
Best Buy Blendjet Help Center
If you purchased your BlendJet from Best Buy, you can find additional support resources through Best Buy’s BlendJet Help Center. This section provides an excellent starting point for troubleshooting your BlendJet, including step-by-step tutorials on cleaning, charging, and operating your BlendJet.
Blendjet One Tips
If you have the BlendJet One model, there are a few things you need to know. For example, when the circle turns purple while blending, it means the battery is getting low. The circle flashes red and purple when you need to recharge the battery. Additionally, if your BlendJet is in lock mode, you can get it out by pressing and holding the power button for five seconds.
Justanswer
If you’re having trouble with your BlendJet, you can also get help from JustAnswer. This online service connects you with experts who can troubleshoot your BlendJet and answer any questions you may have about its operation. Simply submit your query, and you’ll receive expert help within minutes.
By using these BlendJet troubleshooting resources, you can quickly fix many common issues without having to return your blender for repair or replacement. Whether you need help aligning the arrows, removing an object stuck in the blade, or are experiencing charging or power-related issues, these resources should have you covered.
Customer Reviews
If you are facing troubles with your Blendjet 2, worry not. There are a few customer reviews and tutorials shared by Blendjet that can be helpful in troubleshooting the issues. The common problems include red flashing lights, not enough power, object stuck in the blade, or too much in the jar.
Follow the tutorials, and if your issue remains unresolved, you can always contact their help center for support.
When it comes to Blendjet 2 troubleshooting, the best feedback often comes from those who have used the product. As such, we’ve compiled some customer reviews to help you identify problems and solutions.
Honest Blendjet Review
One Reddit user gave an honest Blendjet review and said, “I must say, I’m thoroughly disappointed with my purchase. The Blendjet is very underpowered and struggles to blend even the simplest of smoothie ingredients.”
Another Blendjet user, Kawaiisaria, said in a Youtube video, “Honestly, I didn’t like my Blendjet that much at first because I didn’t feel like it blended everything well, but I played around with it a bit and now I’m happy with it.”
Blendjet Is The Worst Product I Have Ever Bought
In contrast to Kawaiisaria, a different Reddit user had a terrible experience with their Blendjet: “I have to say that the BlendJet is the worst product I have ever bought. The battery life, design, and overall functionality are all terrible. Beware!”
Jet Blender Lighting Up But Not Working
If your Blendjet is lighting up but not working, it may be that the blades are blocked. Red flashing lights could also indicate that the Blendjet needs to be recharged. One user suggested recharging the Blendjet and turning it upside down to shake out any blockages.
Another Youtube user, lauramiltenberger, suggests in a TikTok video that you check for objects stuck in the blade. If too much is in the jar or the jar isn’t filled enough, that could also cause the Blendjet to not work properly.
If none of these solutions work, it’s worth reaching out to Blendjet customer service for further troubleshooting assistance. Overall, while Blendjet 2 troubleshooting can be frustrating, there are solutions available to ensure you can get the most out of your product.
Frequently Asked Questions
What To Do When Blendjet Is Not Working?
If your BlendJet is not working, here are some possible solutions:
- Check if it is fully charged or simply needs recharging.
- Ensure that the base and jar are properly aligned, and the magnet is in the correct position.
- If the blades are blocked by an object or too much in the jar, remove them and try again.
- Try shaking the BlendJet or turning it upside down to loosen the blades.
- If none of these solutions work, contact BlendJet customer support for troubleshooting assistance.
Why Is My Blendjet 2 Blinking Red And Purple?
If your BlendJet 2 is blinking red and purple, it means it needs to be recharged or the blades are blocked. Try to recharge the BlendJet, shake it, or turn it upside down and flip it back over. Remember to align the magnet on the jar and base to prevent blades from not spinning.
How Do I Get My Blendjet Out Of Lock Mode?
To get your BlendJet out of lock mode, make sure the small magnet on the jar and base is aligned. If the blades won’t spin, your BlendJet needs to be recharged or the blades may be blocked. The circle turns purple while blending when the battery is low.
The circle flashes red and purple when the battery is dead.
Is My Blendjet 2 Charging?
To check if your BlendJet 2 is charging, look for a purple circle instead of blue while blending. If it flashes red and purple, it’s time to recharge. If it won’t turn on, the red and purple lights indicate it needs charging.
Try shaking it or turning it upside down to get it working. Make sure the jar and base magnets are aligned. If the blades are blocked, red flashing lights can mean it needs recharging.
Conclusion
Blendjet 2 is a versatile and portable blender that makes blending on-the-go a breeze. However, like any other appliance, it is not immune to issues. The good news is that most of the common problems with the Blendjet 2 are easy to fix with a few troubleshooting tricks that we have discussed in this post.
If you face more complex issues that require assistance, Blendjet’s help center has a dedicated support team to help you out. So, remain calm and fix the problem or get help from the professionals. Happy blending!